TLT-Turbo to Showcase Energy Efficient Ventilation at TÜRKÇIMENTO Technical Seminar

TLT-Turbo will be attending the Turkish Cement Manufacturers’ Association (TÜRKÇİMENTO) Technical Seminar to exhibit how the TLT-Turbo range of fans for the cement industry can improve energy efficiency in the industry.

The 16th International TÜRKÇIMENTO Technical Seminar and Exhibition takes place from 24 – 28 October 2022, at Kaya Palazzo Golf Resort Belek in Antalya, Turkey. This year’s event theme is the Future of Cement in Green Transformation.

The Technical Seminar provides the opportunity for cement producers to stay up to date on the latest developments and to consider investing in new technology. The event attracts both national and international attendees from the cement industry, as well as service and technology providers.

“Addressing the specific needs of the cement production industry is a key focus in the continual development of our industrial fan range,” says Ersin Cetin, TLT-Turbo Regional Sales Manager. “Our ventilation equipment ticks the box in terms of energy efficiency which helps manufacturers reach their environmental sustainability goals and along with this, our fans provide high uptime and reliability.”

TLT-Turbo’s fans have a proven track record of standing up to some of the most extreme operational conditions and consistently providing trouble-free, reliable operation. TLT-Turbo offers specialized ventilation for cement production with a range that includes Raw Mill Baghouse Fans, Kiln Exhaust Fans, Clinker Cooler Fans and Coal Mill Fans.

Read More

Research Reveals Best Wear Solutions for Ventilation Equipment

Long lasting equipment is a must have for many industries due to the cost savings that can be derived from a longer lifespan on equipment and components. At their recently upgraded testing facility, TLT-Turbo GmbH are using a new research methodology based on dust particulate samples from steel manufacturing and processing facilities to determine the best solutions for minimizing wear on ventilation equipment based on the unique abrasive factors of this specific operating environment.

TLT Turbo GmbH is one of the world’s leading suppliers of heavy-duty centrifugal fans designed to operate efficiently in the most challenging applications. In the steel industry, these fans are exposed to high dust loads which causes them to prematurely fail due to faster wear. To determine the best solutions for slowing wear and tear, TLT-Turbo researchers procured original samples of the dust present at customer facilities and used these to investigate the reasons for wear and to determine remedies for reducing it.

Factors Affecting Wear on Fans

According to Sabine Groh, Product Manager for industry fans at TLT-Turbo in Bad Hersfeld, Germany, the main contributing factor to wear is the velocity of the abrasive particle. The erosion rate measurement below illustrates the exponential increase in the erosion rate based on velocity.

(Above) Figure 1: Erosion rate in relation to velocity of particles

Groh states that additional factors include hardness, shape, number of particles and the angle between the particle jet and the surface of the fan component. The image below provides an indication of the typical shape of the abrasive particles used for research at TLT-Turbo’s newly upgraded particle jet test stand in Zweibrücken.

(Above) Figure 2: Magnified image of typical dust used in particle jet experiments

Finally, Groh argues that the particle size in comparison to the size and distribution of grain of the coating also plays a role. Figure 3 below shows a micrograph of a hardfacing layer suitable for abrasive dust with small particle sizes using a prototypical particle of 20µm. Figure 4 below shows a micrograph of a common Chrome Carbide hardfacing with a prototypical particle of 20µm as well. “In Figure 3 we can observe that the particle is less able to wash out the matrix because of the more homogenous distribution of the smaller grains. Figure 4 however shows that the large grain size and large distribution allows for easier erosion of the matrix,” Groh explains.

(Above) Figure 3: 250x magnified photomicrograph of
special Hardfacing optimized for small abrasive
(Above) Figure 4: 250x magnified photomicrograph of typical Chrom Carbide Hardfacing

This proves that if the abrasive particles are small enough to impinge between the relatively hard grains of a hardfacing, then the matrix will be washed away and the grains will easily fall out afterwards. If the grains of the hardfacing are small enough with less space between them, matrix erosion will be prevented and the hardfacing will have a higher durability.

Emerging Research Trends

Over the last 10 years, TLT-Turbo performed thousands of particle jet tests to determine the erosion rate of different coatings and materials. To achieve a comparison between these coatings, a standardized test sand with a specific grain size distribution was utilized as abrasive material (as illustrated in Figure 2 above).

“TLT-Turbo has developed an extensive database on the erosion rates of different coatings and materials that have been exposed to the test sand at different angles and velocities. This database allows us to select promising solutions for customer’s abrasive problems,” says Groh. 

TLT-Turbo has recently upgraded its test equipment and now has the capability to test using original dust supplied by the customer. Groh explains that this allows for the specific customer application, with all major influencing factors to be reproduced. In addition to the velocity and angle of the abrasive dust, a realistic indication of particle size, shape and hardness can now contribute to more accurate test results. “This means that we can provide a more definitive prediction of how a change in wear protection will affect the service lifespan of the equipment to each customer.”

Wear Test Case

The TLT-Turbo test lab asked a European customer to provide samples of dust from their facility for testing to determine how they could benefit from a coating solution suited to their specific application and environmental challenges.

(Above) Figure 5: A sample of the dust provided for testing

From this specific dust particle sample, the grain size distribution was determined by performing a sieve analysis. Particle jet experiments were then performed on two preselected coatings. These experiments are in accordance with the norm DIN 50332 and were executed for three angles: 20°, 45° and 90°.

Figure 6 below illustrates the test results. The TLT W-104 coating was determined to be the best alternative for all impact angles, however the superiority of W-104 is best illustrated when used for the 90° impact angle.

(Above) Figure 6: Erosion rate of customer dust for preselected coatings

In extremely abrasive applications, the choice of wear protection determines the service life of the fan. The upgraded test lab and particle jet test stand has afforded TLT-Turbo engineers a deeper understanding of the mechanisms behind wear and the effects of specialized solutions. This has led to new approaches in product advancement and development that are grounded in providing solutions that meet market requirements.

“The ability to use the original dust from the customer’s facility and duplicate the conditions such as velocity and the impingement angle on the coating, allows us to determine how all these factors including the shape, size and hardness of the abrasive particles affect erosion rates. TLT-Turbo has taken another great step forward in being able to reliably calculate the effect that changing in coatings to prevent wear will have on extending the service life of ventilation equipment. Establishing the best solution for wear related challenges now becomes a collaboration between TLT-Turbo and the customer.” Groh concludes.

Read More
Close Popup

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

Close Popup
Paramètres de confidentialité sauvegardés !
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.


Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Save
Accept all Services